Accurately install Schlage AD cylindrical series locks using the HIT-145 Drill Guide. This unit, thru-bolts to door, using the existing 2-1/8" cross bore for alignment. All required mounting and function holes including the DPS switch in the door edge are located with hardened drill bushings. There are drill bushings on both sides of template, to allow drilling from either side of door. Standard drill guide will accommodate doors up to 2" thick with a 2-3/4" Backset. DPS drill guide will center on a standard 1-3/4" door.
Ship via: Can Ship UPS
Alternate Codes: HIT-145, HIT-145N, HIT145, HIT145N, MAJHIT-145
Installation Tools: Templates
Type: Schlage AD Cylindrical Locks