Official PayPal Seal
CRL Z810BN Square Type Flat Base Zinc Clamp, Brushed Nickel

CRL Z810BN Square Type Flat Base Zinc Clamp, Brushed Nickel

Your Price: $11.37
Part Number

:CRL_Z810BN

Hardware > Hardware Accessories

Door & Window Hardware > Glass Hardware > Glass Entrance System,Manufacturers > CRL

CRL Z810BN Square Type Flat Base Zinc Clamp, Brushed Nickel

Features:

  • Designed to Accommodate Glass Thickness of 3/8" (10 mm)

  • The Ideal Clamp for Use on Mezzanines Partitions Railings and Windbreaks Base Metal: Zinc Casting

  • Steel Pin Available for Additional Glass Support Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)

For securing the Z-Clamp to thin wall tubing (less than 1/8") use CRL's ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation drill a 1/2" (12 mm) hole insert the riv-nut align the clamp with the bolt and drilled hole and start threading the bolt into the nut which results in compressing the nut. 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support. Specifications: Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm) Base Design: Flat For Use With: Square Tubing or Other Flat Surfaces Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications. Glass Fabrication: For 1/4" (6 mm) 5/16" (8 mm) and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support. Includes: Rubber Gaskets (CRL Cat. No. Z38SG) and Steel Pin (for optional use) with Grommet.

Product Details:

  • Finish: Brushed Nickel

  • Height/Length: 2-1/8" (54 mm)

  • Width: 2-1/8" (54 mm)

  • Weight: 8 oz (227g)

  • Designed to Accommodate Glass Thickness of 3/8" (10 mm)

  • The Ideal Clamp for Use on Mezzanines Partitions Railings and Windbreaks Base Metal: Zinc Casting

  • Steel Pin Available for Additional Glass Support Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)

  • Additional Product Information For securing the Z-Clamp to thin wall tubing (less than 1/8") use CRL's ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation drill a 1/2" (12 mm) hole insert the riv-nut align the clamp with the bolt and drilled hole and start threading the bolt into the nut which results in compressing the nut. 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support. SPECIFICATIONS: Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm) Base Design: Flat For Use With: Square Tubing or Other Flat Surfaces Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications. Glass Fabrication: For 1/4" (6 mm) 5/16" (8 mm) and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support. Includes: Rubber Gaskets (CRL Cat. No. Z38SG) and Steel Pin (for optional use) with Grommet.

Related Items

Recently Viewed Items