Cabinet - Fabricated of 18-gauge (1.2mm) type 304 stainless steel with exposed surfaces having a #4 satin-finish. All welded construction.
Door - Fabricated of 18-gauge (1.2mm) type 304 stainless steel with exposed surfaces having a #4 satin-finish. Door attached with heavy duty rivets and is fitted with tumbler lock.
Dispensing Mechanism and Inner Cabinet - Fabricated of 18-gauge (1.2mm) and 22-gauge (0.8mm), type 304 stainless steel.
Spindles (2)- One piece molded ABS polyethylene with stainless steel tips to prevent damage when roll automatically drops in place.
Roller cannot be removed when door is locked.
Toilet tissue rolls are loaded and locked into dispensing mechanism. Extra roll automatically drops in place after bottom roll is depleted. Depleted rolls can only be removed after unlocking door.
Unit holds two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter 1800 sheets
INSTA LLATION :
Secure to toilet partition by 4 sheet-metal screws furnished by manufacturer or preferably by through bolts, 3/16" (5mm) diameter. For installation instructions on stud walls, provide concealed backing at screw points secured to studs, and fasten with 4 #10 x 1-1/2" (38mm) sheet-metal screws; backing must comply with local building codes. If wood blocking is not available, the following optional fasteners are suggested:
Tile/Masonry - Plastic or lead anchors
Plaster/Drywall - Toggle bolts